VOLVO
PDM-B118D04 - Invalid data received from "Door Control Module A". General Failure Information. System Internal Failures
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
Although the code refers to invalid data from a door control module, the fault concerns the right camera module (RCM). The front right door module communicates with it over the LIN bus. The fault is stored when internal parts of the right camera module do not work, and then the LED does not light.
Mögliche Ursachen
- Internal fault in the camera module
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Test drive the car and check whether the right-hand blind spot warning works
- 3With a diagnostic tool, you can see which fault codes the right camera module has stored
- 4Look for damage and loose connections in the wiring to the camera module
- 5If the wiring is fine, have a workshop check or replace the camera module, since the fault is inside it
Symptome, die Sie bemerken können2
- LED does not light
- A message appears in the information display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.