VOLVO
PDM-B12DA12 - Blind Spot Warning Indicator. General Electrical Failures. Circuit short to battery
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The PDM keeps watch on the power feed to the LED that signals when something sits in the blind spot. The module has detected that the supply cable to the LED is shorted to voltage.
Mögliche Ursachen
- Supply cable to the LED is shorted to voltage
Was Sie tun können
- 1Read the code, clear it and run a test drive to see whether the blind spot warning LED works and whether the code comes back
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check the connectors at the LED and the door module for loose, oxidised or corroded contacts
- 4Use a multimeter to check that the cable to the LED has no voltage when the LED is switched off, which would indicate a short to voltage
- 5If you have diagnostic equipment, activate the blind spot warning LED and check that it lights
- 6If the wire is intact but the code comes back: have a workshop check the LED and the door module
Symptome, die Sie bemerken können2
- Warning lights and chimes come on or behave abnormally
- Warning symbol and text message are shown in the display
Was der Fehler beeinflussen kann1
- The power supply to the LED stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.