VOLVO
PDM-B1A9883 - LIN Bus circuit #1. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The driver and passenger door modules (DDM/PDM) both send and receive information via LIN, a standardised serial communication method. On LIN bus 1 they communicate with the rear door control modules and the switch panel in the driver's door. The module has detected that the signal is incorrect, and the check is made with a checksum that shows whether the message is valid.
Mögliche Ursachen
- The fault lies in the control module that sends the signal
Was Sie tun können
- 1Read and clear the code, then run a test drive and check whether the switch panel in the driver's door and the rear door window lifts work
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check that the connectors between the door modules and the switch panel are secure and free from moisture and oxidation
- 4Check the cable between the door modules for visible damage
- 5Have a workshop check the control module that sends the signal, using diagnostic equipment
Symptome, die Sie bemerken können2
- The driver door switch panel does not work
- The electric window in the rear door does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.