VOLVO
PDM-B1A9886 - LIN Bus circuit #1. Bus Signal / Message Failures. Signal invalid
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The driver and passenger door modules (DDM/PDM) both send and receive information via LIN, a standardised serial communication method. On LIN bus 1 they communicate with the rear door control modules and the switch panel in the driver's door. The module has detected that a signal is invalid, which means the message does not match what is expected.
Mögliche Ursachen
- The fault lies in the control module that sends the signal
Was Sie tun können
- 1Read and clear the code, then run a test drive and check whether the switch panel in the driver's door and the rear windows work
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check that the connectors between the door modules and the switch panel are free from moisture, oxidation and loose contact
- 4Check that the cable between the door modules is intact and free from visible damage
- 5Have a workshop check the control module that sends the signal, using diagnostic equipment
Symptome, die Sie bemerken können2
- The driver door switch panel does not work
- The electric window in the rear door does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.