VOLVO
PDM-DD20 - LIN communication camera module Internal fault
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The PDM talks to the camera on the passenger side over LIN, a standardised serial communication method. The module has logged a fault inside its link with the camera, and the code is set as a result.
Mögliche Ursachen
- A fault inside the camera in the passenger door
Was Sie tun können
- 1Activate the blind spot system and check that the LEDs flash three times; then start the engine and check that the LED works
- 2Read the code, clear it and run a test drive. If the code does not come back, no further action is needed, as the fault may have been temporary
- 3Check that the connectors at the camera and the door module are secure and free from moisture and oxidation
- 4Check that the wire between the door module and the camera is intact and free from visible damage
- 5If the fault remains: have a workshop check the camera on the passenger side and replace it if needed
Symptome, die Sie bemerken können2
- The LED does not light
- A message is shown in the information display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.