Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    PDM-U020287
    VOLVO

    PDM-U020287 - Lost Communication With "Door Control Module D". Bus Signal / Message Failures. Missing message

    System

    Beifahrertürmodul (PDM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Was bedeutet der Fehlercode?

    The PDM talks to the rear door on the passenger side over LIN, a standardised serial communication method. The module has registered that the signal from the rear door is missing, and the code is set as a result.

    Mögliche Ursachen

    • Open circuit in the communication cable
    • Communication cable is shorted to ground
    • Communication cable is shorted to supply voltage
    • Contact resistance, oxidation or poor contact in the connections

    Was Sie tun können

    1. 1Read the code, clear it and run a test drive to see whether it comes back
    2. 2Check the fuses in the fuse box and make sure they are intact
    3. 3Check the connectors in the rear door on the passenger side and at the door module for moisture, oxidation and loose contact
    4. 4Use a multimeter to check that the cable between the door module and the rear door is intact and not shorted to ground or voltage
    5. 5If the wire is intact but the code comes back: have a workshop check the rear door control module

    Symptome, die Sie bemerken können4

    • The electric window in the rear door on the passenger side does not work, works with reduced function or works incorrectly
    • Central locking does not work or works incorrectly
    • The child lock in the rear door does not work
    • The switch indicator does not work

    Was der Fehler beeinflussen kann1

    • The control module blocks further codes linked to the rear door from being set

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.