VOLVO
PDM-U040100 - Invalid Data Received from ECM/PCM A. General Failure Information. No sub type information
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The driver and passenger door modules (DDM/PDM) continuously receive outdoor temperature information from the engine control module (ECM) and check its quality. If the quality of the signal is lower than the module can accept, the code is set.
Mögliche Ursachen
- The fault lies in the engine control module (ECM)
Was Sie tun können
- 1If you have diagnostic equipment, read the codes in the engine control module (ECM) first, as the fault is located there
- 2Clear the code only after the fault in the engine control module has been put right, then check whether it comes back
- 3Have a workshop trace the fault in the engine control module, as the source of the fault is there
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The door module uses the temperature signal from its own built-in sensor instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.