VOLVO
PHM-U210100 - Control Module Configuration Incompatible. General Failure Information. No sub type information
System
Telefonmodul (PHM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The telephone module (PHM) checks its settings against the vehicle data in the central electronics control module (CEM) when parameters are read out. The fault is stored when the vehicle configuration contains incorrect data, and then the phone and Volvo On Call can work poorly.
Mögliche Ursachen
- Incorrect configuration parameter
- The cause may lie in the control module that sends the configuration
Was Sie tun können
- 1Check the fuses in the fuse box. Their locations are shown in the owner's manual or on the cover of the box
- 2Has a control module been replaced recently? If so, the configuration in the car may have received wrong data, and a workshop must decide
- 3Have a workshop read the fault codes in the central electronics control module (CEM) with diagnostic equipment and load new software where needed, followed by new software in the telephone module
- 4After the work, check that the phone and Volvo On Call work as they should
Symptome, die Sie bemerken können4
- Volvo On Call has no function or reduced function
- The phone has no function or reduced function
- The mobile phone has problems, and a message appears in the text display
- The mobile phone does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.