VOLVO
PSCM-C102D68 - High Friction Inside Power Steering. Algorithm Based Failures. Bus Signal / Message Failures
System
Servolenkungs-Steuermodul (PSCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The power steering control module (PSCM) has measured friction in the steering system that is too high, and a message fault has also occurred. This code is an information code and does not in itself mean that the control module is faulty.
Mögliche Ursachen
- Damaged power steering control module (PSCM)
Was Sie tun können
- 1Clear the fault code and test drive to see whether it returns
- 2Check that the steering column and steering do not bind or get blocked
- 3Have a workshop read the control module's messages on the bus with diagnostic equipment
- 4Safety note: steering is safety-critical, so have a workshop decide whether the control module should be replaced
Symptome, die Sie bemerken können3
- Steering requires extra or uneven effort
- Other steering or handling problems
- Unusual noise from the steering, unsure when, or at all times
Was der Fehler beeinflussen kann1
- Steering function may be reduced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.