VOLVO
PSCM-C200100 - Electric Hydrolic power assisted steering low temperature. General Failure Information. No sub type information
System
Servolenkungs-Steuermodul (PSCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Nur Motor: D4164T
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: D4164T
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
Was bedeutet der Fehlercode?
The power steering control module (PSCM) has registered that its internal temperature is too low, which affects the electro-hydraulic power steering. The power assistance may be weak or missing until the control module has warmed up.
Mögliche Ursachen
- The module's internal temperature is below the acceptable level
Was Sie tun können
- 1Let the car idle for a while so the control module can warm up, then see whether the fault goes away
- 2Clear the fault code and test drive to see whether it comes back
- 3Check that the connectors at the control module are firmly seated and free from corrosion
- 4If the fault returns: have a workshop check the control module
- 5Safety note: steering is safety-critical, so have a workshop carry out the further checks if the assistance is still missing
Symptome, die Sie bemerken können2
- Text window with warning symbol and yellow symbol and text message
- No or poor steering assistance
Was der Fehler beeinflussen kann1
- Power to the pump motor is restricted
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.