Was bedeutet der Fehlercode PSCM-U210100?

Diagnose und Fehlercodedefinition für PSCM-U210100 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

PSCM-U210100 - Control Module Configuration Incompatible. General Failure Information. No sub type information

System

Servolenkungs-Steuermodul (PSCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (11)

Was bedeutet der Fehlercode?

The control module compares the vehicle configuration received from the central electronic module (CEM) with the configuration stored in itself. The fault is stored when they do not match. The cause may be a module taken from a different car, or wrong software in the control module.

Mögliche Ursachen

A module taken from a different car was installed here
Wrong software has been loaded into the control module
Fault in the central electronic module (CEM)
Software fault in the control module

Was Sie tun können

1Check that the control module comes from the same car, for example if it has been replaced or fitted after a repair
2Read the fault codes in the car, clear this one and check whether it returns
3If the fault remains, have a workshop program the control module with the correct software and check the central electronic module (CEM)
4Steering is a safety system: have a workshop check the car if the steering feels abnormal

Symptome, die Sie bemerken können3

Power steering assistance control does not work
Steering requires extra or uneven effort
Other steering or handling problems can be felt

Was der Fehler beeinflussen kann1

The control module uses a predefined value instead of the vehicle configuration

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.