VOLVO
PSM-B1B8924 - Seat Slide Motor Hall Sensor. General Signal Failures. Signal stuck high
System
Elektrischer Sitz (PSM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The fault code means no Hall pulses are registered from motor 1, which controls the front-rear adjustment of the seat, even though the motor is activated. Automatic operation of the seat and the outer mirrors then does not work, and neither does the automatic front seat memory adjustment.
Mögliche Ursachen
- Damaged Hall sensor in motor 1
- Signal cable short-circuited to supply voltage
Was Sie tun können
- 1Check that the seat fuses are intact.
- 2Check that the connectors to motor 1 are firmly seated and not corroded.
- 3Use a multimeter to check that the signal wire from the Hall sensor has no contact with supply voltage.
- 4If you have a diagnostic tool: run motor 1 and check that the Hall sensor value changes.
- 5If the fault remains, have a workshop check the motor with its Hall sensor and the control module.
Symptome, die Sie bemerken können2
- Automatic operation of the seat and outer mirrors does not work
- The automatic memory adjustment of the front seat is not working
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.