VOLVO
PSM-B1C0224 - Memory Store Switch. General Signal Failures. Signal stuck high
System
Elektrischer Sitz (PSM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The power seat control module (PSM) has detected that the MEM memory button, used to store a seat position, has been held pressed for longer than allowed, which sets the code. The button may have jammed in the pressed position. Seat positions may then not be stored or recalled as normal.
Mögliche Ursachen
- The memory button has jammed in the pressed position
- Damaged control panel
Was Sie tun können
- 1Check that the seat fuses are intact; their locations are in the owner's manual or on the fuse chart
- 2Press the MEM button in and release it; it should spring back freely. If it sticks or stays down, the control panel is the fault
- 3Test the seat and check whether stored positions can be saved and recalled when the MEM button is used
- 4If you have diagnostic equipment, read the MEM button's status in live data and check that it returns to not-activated when the button is released
- 5Check that the control panel is firmly fitted and not damaged, wet or dirty around the buttons
- 6Clear the code after the checks and road test the car. If it returns and the MEM button still sticks, replace the control panel
Symptome, die Sie bemerken können4
- Reduced seat function
- Memory buttons do not work
- Front seat, power seat adjustment and folding do not work
- Automatic adjustment to a stored position (memory) does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.