VOLVO
RDAR-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2011–), S80 (2007–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The radio receiver (RDAR) receives information about the car's actual configuration from the central electronic module (CEM). If it has lost that information, the receiver's start-up configuration has not been completed, and the code is set.
Mögliche Ursachen
- Fault in the central electronic module (CEM), which sends the configuration and must be fault-traced first
Was Sie tun können
- 1Read the codes in the central electronic module (CEM) and fix them first
- 2Check that the connectors on the CAN network are firmly seated and free from oxidation and breaks
- 3Check that the battery is in good condition and that its terminals are tight
- 4Clear the code after the work and check that it does not come back
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.