Was bedeutet der Fehlercode REM-3FD1?

Diagnose und Fehlercodedefinition für REM-3FD1 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo S80 (1999–2006)). Steuergerätereparatur bei OBD Tuning.

VOLVO

REM-3FD1 - Relay, gas tank valve. Signal too high

System

Hintere Elektronik (REM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

3 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The rear electronic module (REM) controls the relay for the gas tank valve. The code is set when the signal to the relay coil is too high, which happens if the relay is damaged or if voltage is present on the relay coil. The car then cannot be driven on gas, and switching to gas operation can make the engine stall.

Mögliche Ursachen

Damaged relay
Short circuit to supply voltage in the relay coil

Was Sie tun können

1Read and note the fault code, clear it and test drive the car to see whether it returns
2If you have a diagnostic tool, activate the gas tank valve relay a few times and listen for a click; if no click is heard the fault is probably permanent
3Check that the relay is seated correctly and not damaged, and if it is, have a workshop replace it

Symptome, die Sie bemerken können2

The engine does not run on gas
Switching to gas operation makes the engine stall

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.