VOLVO
REM-6A11 - Door switch. Signal too high
System
Hintere Elektronik (REM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The REM registers too high a signal from a door switch, which normally shows that the door is closed. The cause is that the switch is shorted to supply voltage. The module reads the switches with short voltage pulses, and the fault can give a wrong door alarm and a warning lamp on the instrument panel.
Mögliche Ursachen
- The switch indicating a closed door is shorted to supply voltage
Was Sie tun können
- 1With the ignition on, read the door status and open and close the doors one at a time. The status for each door should change when it is opened and closed
- 2If the status does not change, the fault is permanent and the circuit for the door showing the fault should be checked
- 3Check the connector and wiring at the door for chafing, loose connectors and damage
- 4Use a multimeter to check that the wire to the switch has no contact with the positive supply
- 5If the fault remains, have a workshop with diagnostic equipment check the switch and the control module
Symptome, die Sie bemerken können3
- General warning lamp on
- Message shown in the text display
- The door alarm does not trigger
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.