VOLVO
REM-8F10 - Position sensor xenon lamp. Signal too high
System
Hintere Elektronik (REM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The module (REM) reads the xenon lamp position sensor. The fault code is set if the value it receives is too high, which comes from the signal cable being shorted to supply voltage, from the position sensor being fitted incorrectly, or from a faulty sensor. The road illumination and the automatic headlamp range control then stop working.
Mögliche Ursachen
- Signal cable shorted to supply voltage
- The xenon lamp position sensor is fitted incorrectly
- Faulty position sensor
Was Sie tun können
- 1Check that the xenon lamp position sensor is correctly fitted
- 2With the ignition off, use a multimeter to check that the signal cable to the position sensor has no contact with supply voltage
- 3Check that the position sensor's supply and ground connections are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the position sensor and the REM
Symptome, die Sie bemerken können2
- The road surface is not illuminated
- The automatic headlamp range control does not work
Was der Fehler beeinflussen kann1
- The shortest headlamp range is used
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.