Was bedeutet der Fehlercode REM-E010?

Diagnose und Fehlercodedefinition für REM-E010 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

REM-E010 - Power supply control module. Signal too low

System

Hintere Elektronik (REM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The REM checks its own power supply against the voltage reported for the CEM on the CAN network. The code is set when the REM's supply sits too low compared with that.

Mögliche Ursachen

Partly burnt fuse for the REM
Damaged power supply cable to the REM
Loose ground connection to the REM
Contact resistance or oxidation in the connections

Was Sie tun können

1With diagnostic equipment and the engine running, compare the supply voltage to the REM with that to the CEM; they should be roughly equal
2Check that the connectors at the REM are fully seated and free from oxidation
3Check the fuse for the REM and see whether it is partly burnt or burnt
4Check that the screw connection from the battery to the REM is tight and free from oxidation
5Check the ground connection to the REM; it should be tight and free from oxidation. Remedy the fault, clear the code and road test the car with the engine running

Symptome, die Sie bemerken können5

Central locking does not work at all
The fuel gauge shows zero although there is fuel
Rear window heating does not work
The tail lamps do not work
The folding headrest does not work

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.