Was bedeutet der Fehlercode RTI-E003?

Diagnose und Fehlercodedefinition für RTI-E003 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

RTI-E003 - Configuration fault. Faulty configuration

System

Navigationssystem (RTI)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)

Modelle nach Baujahr und Motor anzeigen (4)

Was bedeutet der Fehlercode?

The road traffic information control module (RTI) checks its configuration ID against the signal configuration that the CEM sends on the CAN network. If the IDs do not match, or if communication with the CEM is interrupted, the code is set. With an open circuit in both CAN wires, the RTI only answers the diagnostic tool and normal CAN communication stops, which is known as expulsion mode.

Mögliche Ursachen

Incorrect CAN configuration ID: the module is not meant for this vehicle, such as a used unit with different software or hardware
Open circuit in the CAN wiring between the RTI and the CEM

Was Sie tun können

1Start by looking for codes for lost communication in the central electronic module (CEM)
2With the negative battery lead disconnected, use a multimeter to check that the CAN wires between the RTI and the CEM have no open circuit
3Check that the connectors at the RTI are fully seated and free from oxidation
4If the wires are intact and the fault remains, the RTI may be a used unit with the wrong configuration; have a workshop check the configuration and download new software if needed

Symptome, die Sie bemerken können5

The display for the RTI does not work
The display does not deploy
The map shows the car in the wrong place
The RTI rheostat function does not work
Traffic information is not shown or not updated

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.