VOLVO
SAS-0003 - Steering wheel angle signal A. Signal too high. Intermittent fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The steering wheel angle sensor reads the wheel with LEDs and receivers that follow a perforated code disc. The code is set when signal A, or any of the other steering wheel angle signals, is too high. The fault is intermittent.
Mögliche Ursachen
- Poor contact or oxidation at the connections and connector blocks
- Short-circuit to supply voltage
- Open circuit
- Defective control unit
Was Sie tun können
- 1With the ignition off, check that the connectors at the steering wheel angle sensor and the steering wheel module are fully seated and free from oxidation
- 2With the ignition off, use a multimeter to check that the cables to the angle sensor have no open circuit and no contact with voltage (plus)
- 3With diagnostic equipment and the ignition on, read the steering wheel angle signals and see whether any of them looks wrong
- 4Safety: anti-spin and stability are switched off while the fault is present, so have a workshop remedy it; do not work on the steering system yourself
Symptome, die Sie bemerken können3
- The anti-spin warning lamp is on
- The stability function is absent
- Anti-spin does not work
Was der Fehler beeinflussen kann2
- The stability function is disconnected
- The anti-spin function is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.