VOLVO
SAS-0008 - Steering wheel angle signal IX. Signal too low. Intermittent fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
Signal IX from the steering wheel angle sensor is too low, and the code is set then. The signal is one of several that the code disc provides, and the fault is intermittent.
Mögliche Ursachen
- Poor contact or oxidation at the connections and connector blocks
- Open circuit
- Short-circuit to ground
- Defective SAS element
Was Sie tun können
- 1With the ignition off, check that the connectors at the angle sensor and the steering wheel module are fully seated and free from oxidation
- 2With the ignition off, use a multimeter to check that the cables to the angle sensor have no open circuit and no contact with ground (the bodywork)
- 3If the cables are intact, the SAS element in the angle sensor may be defective; replacing the sensor is a job for a workshop
- 4Safety: anti-spin and stability are switched off while the fault is present, so have a workshop remedy it; do not work on the steering system yourself
Symptome, die Sie bemerken können3
- The anti-spin warning lamp is on
- The stability function is absent
- Anti-spin does not work
Was der Fehler beeinflussen kann2
- The stability function is disconnected
- The anti-spin function is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.