VOLVO
SAS-000B - Control module. Internal fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The steering wheel angle sensor control module has detected a fault in itself. The fault switches off the stability control function. The module is mounted in the lever module, shared with the steering wheel module (SWM), and gets its power from there.
Mögliche Ursachen
- Fault inside the SAS control module itself
Was Sie tun können
- 1Clear the code, road test the car and read the code again to see whether the fault is still present
- 2Turn the steering wheel fully to the right, then fully to the left, and set it straight ahead before reading the code
- 3With diagnostic equipment, read the counters showing how often the fault has occurred: many incorrect driving cycles point to a recurring fault
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5While the fault is present stability control stays off, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is on
- General warning lamp is on
- Stability control function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.