VOLVO
SAS-0010 - Steering wheel angle signal IY. Signal too low. Intermittent fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The signal from steering wheel angle channel IY is too low, and the fault is intermittent: it has occurred at some point but does not always show. The cause lies in connectors and wiring to the sensor, or in the sensor element itself.
Mögliche Ursachen
- Contact resistance or oxidation in connections and connectors
- Open circuit in the wiring
- Short circuit to ground
- Defective sensor element in the steering wheel angle sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the steering wheel angle sensor are secure and free from corrosion
- 3Using a multimeter, check that the wiring from the sensor is not short-circuited to ground (the body)
- 4Follow the wiring from the steering wheel angle sensor and look for chafing, pinching and loose clips
- 5If you have a diagnostic tool: follow signal IY in live data while turning the wheel, and see whether the value stays low or jumps in some positions
- 6The stability function stays off while the fault is present, so have a workshop repair it promptly if it returns
Symptome, die Sie bemerken können3
- Anti-spin warning lamp comes on
- Stability control function not working
- Anti-spin function not working
Was der Fehler beeinflussen kann2
- Stability control function disconnected
- Anti-spin function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.