Was bedeutet der Fehlercode SAS-0012?

Diagnose und Fehlercodedefinition für SAS-0012 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SAS-0012 - Steering wheel position signal R1. Signal too low. Intermittent fault

System

Lenkwinkelsensor (SAS)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The steering wheel angle signal R1 from the sensor reads too low. The fault is intermittent, so it may be absent now even if it was present before. Possible causes are poor connections, an open circuit or a short to ground, or a defective sensor element.

Mögliche Ursachen

Poor contact or oxidation in connections and connectors
Open circuit in the wiring
Short circuit to ground
Defective SAS element in the sensor

Was Sie tun können

1Read and note the code, clear it and road test to see whether it returns
2Check that the connectors at the steering wheel angle sensor are firmly seated and free from corrosion
3With a multimeter, check that the wiring from the sensor has no contact with the body (ground)
4Look along the wiring from the sensor for breaks, chafing and pinched sections
5Stability control is off while the fault is present, so have a workshop repair it promptly if it returns

Symptome, die Sie bemerken können3

Anti-spin warning lamp comes on
Stabilising function absent
Anti-spin function does not work

Was der Fehler beeinflussen kann2

Stability function disconnected
Anti-spin function blocked

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.