Was bedeutet der Fehlercode SAS-0021?

Diagnose und Fehlercodedefinition für SAS-0021 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SAS-0021 - Steering wheel angle sensor signal R1/R2/R3/R4. Signal faulty

System

Lenkwinkelsensor (SAS)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The sensor's control module cannot decide whether signals R1 to R4 have an active fault, so a test routine has to be run. The fault may lie in the sensor or in its control module, and stability control is disconnected while it is active.

Mögliche Ursachen

Fault within the sensor itself
Fault within the sensor control module

Was Sie tun können

1Read and note the code, clear it and road test to see whether it returns
2With diagnostic equipment, run the test routine for the signals after turning the wheel to each end stop twice
3If the test shows the fault is active, check the connectors at the sensor and the control module for oxide and poor contact
4Look for short circuits between the signal wires and for breaks in the wiring, and check that the wiring is not chafed
5Stability control is off while the fault is present, so have a workshop repair it promptly

Symptome, die Sie bemerken können3

Anti-spin warning lamp is on
Stabilising function absent
Anti-spin does not work

Was der Fehler beeinflussen kann2

Stability function disconnected
Anti-spin function blocked

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.