Was bedeutet der Fehlercode SAS-0041?

Diagnose und Fehlercodedefinition für SAS-0041 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SAS-0041 - Steering wheel angle sensor. Internal fault

System

Lenkwinkelsensor (SAS)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

Although the code is named internal fault, it applies when the angle from the sensor exceeds a set value in either direction. The cause is that the sensor is misadjusted.

Mögliche Ursachen

Steering wheel angle sensor is misadjusted

Was Sie tun können

1Read and note the code, clear it and road test to see whether it returns
2With diagnostic equipment, turn the wheel between its end stops and check that the angle in live data updates smoothly
3Check that the connectors at the sensor and the steering wheel module are firmly seated and free from oxide
4Check that the steering wheel module and the sensor are correctly fitted, since the code can point to incorrect installation
5Stability control is off while the fault is present, so have a workshop correct the adjustment promptly

Symptome, die Sie bemerken können3

Anti-spin warning lamp on
Stability control not working
Anti-spin not working

Was der Fehler beeinflussen kann2

Stability function disconnected
Anti-spin function blocked

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.