VOLVO
SAS-0047 - Control unit. No signal. Intermittent fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The sensor control module registers that its ground connection is missing, and the fault is intermittent: it has occurred at some point but may not be active right now. The causes may be oxide in connectors, a break in the ground connection, an internal control module fault, or a signal wire shorted to supply voltage.
Mögliche Ursachen
- Contact resistance or oxidation at a connector in the sensor control module or steering wheel module
- Break in the ground connection
- Internal fault in the control module
- Signal wire short-circuited to supply voltage
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the sensor control module and the steering wheel module are firmly seated and free from oxide
- 3With a multimeter, check that the ground wire to the sensor control module has contact with the body (ground)
- 4With a multimeter, check that no signal wire to the sensor is short-circuited to supply voltage
- 5Stability control stays off while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können2
- Anti-spin warning lamp on
- Stabilising function absent
Was der Fehler beeinflussen kann1
- Stability control disconnected
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.