VOLVO
SAS-B108787 - LIN Bus "A". Bus Signal / Message Failures. Missing message
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
A message is missing on LIN bus A, so the steering wheel angle sensor module receives no information over the bus, and the cruise control stops working. The cause is a communication problem on the bus.
Mögliche Ursachen
- Communication problem on the LIN bus
Was Sie tun können
- 1Check that the fuses for the cruise control are intact
- 2Read and note the code, clear it and road test with the cruise control to see whether it returns
- 3If the fault returns, have a workshop read the communication between the control modules
- 4If the fault remains, the sensor control module may need replacing, which a workshop should carry out
- 5The sensor is part of the car's safety systems, so have a workshop check the fault promptly
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control stays switched off until a correct signal is received
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.