VOLVO
SAS-B10AC28 - Cruise Control Switch. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The signal from the cruise control switch is offset or wrongly zeroed, so the cruise control does not work. The cause is a communication fault between the stalk and the left-hand steering wheel switch (SWSL).
Mögliche Ursachen
- Communication fault between the stalk and the left-hand steering wheel switch (SWSL)
Was Sie tun können
- 1Check that the fuses are intact
- 2Try the cruise control buttons and controls to see whether the function responds
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, read the stalk signals in live data while pressing the buttons, and check that they respond
- 5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault promptly if it returns
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control stays deactivated for the rest of the journey
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.