VOLVO
SAS-B10AC71 - Cruise Control Switch. Mechanical Failures. Actuator stuck
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
One button on the SWSL left-hand switch has been held down for too long, which sets the code. The cruise control does not work, because a button has stuck in the activated position or the switch is faulty.
Mögliche Ursachen
- A button on the left-hand switch is jammed in the activated position
- Faulty left-hand steering wheel switch (SWSL)
Was Sie tun können
- 1Check that the fuses are intact
- 2Press the buttons on the left steering wheel switch one at a time and check whether any of them stays in or fails to return
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, read the button status in live data while pressing and releasing the buttons, and check that no button stays pressed
- 5If a button sticks or the switch is faulty, have a workshop replace it; the fault concerns a safety function, so act on it promptly
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control function does not operate
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.