VOLVO
SAS-B124C29 - Turn Indicator Stalk Switch Pack. General Signal Failures. Signal signal invalid
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The left and right turn signal switches on the stalk have been activated at the same time, which sets the code and stops the turn signal switch working.
Mögliche Ursachen
- Left and right turn signal switches on the stalk are active at the same time
Was Sie tun können
- 1Check that the fuses are intact
- 2Check that the turn signal stalk does not activate both sides at once
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, read the status of the turn signal switches in live data while moving the stalk each way
- 5If the fault remains, have a workshop check the turn signal stalk; the steering wheel angle sensor is part of the safety systems, so act promptly
Symptome, die Sie bemerken können1
- Turn signal switch does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.