Was bedeutet der Fehlercode SAS-B124E29?

Diagnose und Fehlercodedefinition für SAS-B124E29 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SAS-B124E29 - Wiper Stalk Switch Pack. General Signal Failures. Signal signal invalid

System

Lenkwinkelsensor (SAS)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

Two or more of the wiper stalk switches are active at the same time for too long, which sets the code. The wipers may then run only at low speed, and the rear window washer may not work.

Mögliche Ursachen

Single sweep and low-speed wiping activated at the same time
Front and rear washer activated at the same time
Single sweep and high-speed or intermittent wiping activated at the same time
Continuous and intermittent rear window wiping activated at the same time

Was Sie tun können

1Check that the fuses are intact
2Try each wiper stalk position and the washer one at a time to see whether any stays active
3Read and note the code, clear it and road test to see whether it returns
4With diagnostic equipment, follow the wiper stalk switches in live data while the stalk is used
5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault promptly if it remains

Symptome, die Sie bemerken können2

The wipers only operate at low speed
Rear window washer does not work

Was der Fehler beeinflussen kann1

If the wipers are in the active position, they run at the lowest speed

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.