VOLVO
SAS-B124F71 - Steering Wheel Navigation Switch Pack. Mechanical Failures. Actuator stuck
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
One or more buttons on the RTI keypad have been activated for too long, and the code is set. The steering wheel navigation controls do not work because a button has stuck.
Mögliche Ursachen
- A button on the RTI keypad has stuck in the activated position
Was Sie tun können
- 1Check that the fuses are intact
- 2Press the RTI keypad buttons one at a time and check whether any stays pressed
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, follow the button status in live data and see whether any button remains in the activated state
- 5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault if it remains
Symptome, die Sie bemerken können1
- Steering wheel navigation controls do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.