VOLVO
SAS-C008B64 - Excessive steering angle. Algorithm fault. Inappropriate signal
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The steering angle from the sensor exceeds a set value in either direction, and the cause is that the sensor is fitted incorrectly. The stability function is blocked while the fault is present.
Mögliche Ursachen
- Steering angle sensor fitted incorrectly
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Have a workshop check that the angle sensor is fitted correctly; incorrect fitting can damage internal parts at full lock, and then the contact reel must be replaced
- 3Adjusting the sensor requires calibration, so have a workshop carry it out
- 4The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is lit
- General warning lamp is lit
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.