VOLVO
SAS-C008D05 - Steering Angle Sensor (SAS) - ECU internal fault. General information. Programming fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The sensor control module has registered a fault in its own software, which blocks the stability function for as long as the fault is present.
Mögliche Ursachen
- Fault inside the sensor control module's software
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Turn the steering wheel fully to the right, then fully to the left, set it straight ahead and read the code again
- 3With diagnostic equipment, read the counters for the fault status: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is lit
- General warning lamp is lit
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.