VOLVO
SAS-C008E44 - Steering Angle Sensor (SAS) - ECU stack overrun. Internal fault. Data memory fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The sensor control module has registered an internal fault in its software, linked to its data memory. The stability function is blocked while the fault is present.
Mögliche Ursachen
- Fault inside the sensor control module
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Turn the wheel fully right, then fully left, set it straight ahead and read the code again
- 3With diagnostic equipment, a high number of incorrect driving cycles in the status counters means the fault recurs often
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5Stability control stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp comes on
- General warning lamp is lit
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.