VOLVO
SAS-C009005 - Steering Angle Sensor (SAS) - RAM check-sum fault. General information. Programming fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The checksum of the working memory (RAM) in the steering wheel angle sensor control module does not match, so the module has registered an internal fault. The stability function is blocked while the fault is present.
Mögliche Ursachen
- Fault inside the sensor control module
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Turn the wheel fully right, then fully left, set it straight ahead and read the code again
- 3With diagnostic equipment, read the status counters: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is lit
- General warning lamp is lit
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.