VOLVO
SAS-C009102 - Steering Angle Sensor (SAS) - analogue-digital converter LED fault. General fault information. General signal fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The current through one of the digital or analogue sensors that reads the angle sensor's code wheel is too high or too low. The fault sits in the sensor, and stability control is blocked while it is present.
Mögliche Ursachen
- Internal fault in the angle sensor itself
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, read the status counters: many incorrect driving cycles point to a recurring fault, few to a temporary one that needs no action
- 3If the fault returns, have a workshop replace the contact reel with the angle sensor
- 4If the code still returns after that, have a workshop replace the steering wheel module (SWM)
- 5The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is on
- General warning lamp is on
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.