VOLVO
SAS-C009305 - Steering Angle Sensor (SAS) - task overstepping double control CAN MCU (main ECU). General information. Programming fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The double check in the main processor of the sensor control module has overrun the time allowed for one task, which gives an internal fault. Stability control is blocked while the fault is present.
Mögliche Ursachen
- Internal fault in the sensor control module (SAS)
Was Sie tun können
- 1Clear the code and road test the car to see whether it returns
- 2Turn the wheel fully right, then fully left, set it straight ahead and read the code again
- 3With diagnostic equipment, follow the status counters; a high number of incorrect driving cycles means a recurring fault
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5Stability control stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp on
- General warning lamp on
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.