VOLVO
SAS-C009904 - Steering Angle Sensor (SAS). General fault information. Internal fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The sensor control module has registered an internal fault in its timing function. The stability function is blocked while the fault is present.
Mögliche Ursachen
- Internal fault in the control module
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2After turning the wheel fully right and then fully left, set it straight ahead and read the code again
- 3With diagnostic equipment, read the counters: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können3
- Anti-spin warning lamp is on
- General warning lamp is on
- Stability function not working
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.