VOLVO
SAS-C010029 - Analogue sensor 1 outside limit. General signal fault. Signal invalid
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
Analogue sensor 1 in the steering wheel angle sensor is outside its limit, which is due to a fault within the sensor. The stability function is blocked while the fault is present.
Mögliche Ursachen
- Fault within the angle sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, read the counters: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 3If the fault returns, have a workshop replace the contact reel with the angle sensor, and the steering wheel module if the code comes back
- 4The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können1
- Anti-spin warning lamp is on
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.