VOLVO
SAS-C1B0000 - Steering angle sensor. General Failure Information. No sub type information
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Nur Motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering angle sensor (SAS) has registered that its calibration data in the EEPROM memory has been erased. Until the steering wheel is turned a short distance either way, the sensor reports to the brake control module (BCM) that it is not initiated, so the angle is unknown. The fault is an internal fault in the sensor.
Mögliche Ursachen
- Internal malfunction within the steering angle sensor (SAS).
Was Sie tun können
- 1Turn the steering wheel a short distance in either direction so the sensor recalibrates. The code may then disappear.
- 2If the code is still stored, clear it and test drive the car. With a diagnostic tool, check that the fault does not return.
- 3If the fault remains, have a workshop replace the steering angle sensor (SAS).
- 4The sensor affects the stability function. Have a workshop do the repair rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können2
- The traction control warning lamp lights up
- The stability control system does not work
Was der Fehler beeinflussen kann1
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.