VOLVO
SAS-C1B001C - Steering angle sensor. General Electrical Failures. Circuit voltage out of range
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The steering angle sensor (SAS) is mounted in the lever module alongside the steering wheel module (SWM), which powers it. The code is set if the sensors' supply voltage is excessive or insufficient. The fault lies in the sensor itself, and the anti-spin and stability functions are affected.
Mögliche Ursachen
- Damaged steering angle sensor.
Was Sie tun können
- 1Turn the wheel fully right, then fully left, then straight ahead. Switch off the ignition, wait a while and restart the engine.
- 2With a diagnostic tool, read the counters for the code. Many incorrect drive cycles compared with correct ones point to a recurring fault.
- 3If the code returns after replacing the contact reel or angle sensor, the steering wheel module (SWM) must also be replaced by a workshop.
- 4The angle sensor is part of the steering and stability system. Have a workshop diagnose and replace it rather than working on the wheel yourself.
Symptome, die Sie bemerken können5
- A yellow warning symbol and text message appear in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
- The active chassis does not work
Was der Fehler beeinflussen kann1
- The sensor tells the other control modules in the car that its information is incorrect
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.