VOLVO
SAS-C1B0062 - Steering angle sensor. Algorithm Based Failures. Signal calculation failure
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
Two processors in the steering angle sensor calculate the steering angle from the sensor's information and compare the results. The code is set when the results do not match, which is caused by an internal fault in the sensor.
Mögliche Ursachen
- Internal fault in the steering angle sensor (SAS).
Was Sie tun können
- 1Turn the wheel fully one way, then fully the other, and set it straight ahead with the ignition on. Check whether the code is still stored.
- 2With a diagnostic tool, read the number of drive cycles with a fault and compare it with those without one. Many incorrect cycles point to a recurring fault.
- 3If the code returns after a test drive, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor affects the anti-spin and stability functions. Have a workshop carry out the repair rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können5
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
- The active chassis does not work
Was der Fehler beeinflussen kann1
- The sensor warns the other control modules that the data it sends is wrong
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.