VOLVO
SAS-C1B0081 - Steering angle sensor. Bus Signal / Message Failures. Invalid serial data received
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The two processors in the steering angle sensor communicate with each other and continually check that the information between them matches. The code is set when the control module detects a communication fault between the processors. The fault lies in the steering angle sensor itself.
Mögliche Ursachen
- Internal malfunction within the steering angle sensor (SAS).
Was Sie tun können
- 1Clear the code and drive normally for a while. Check whether it returns.
- 2With a diagnostic tool, read the drive-cycle counter. Many incorrect drive cycles point to a recurring fault.
- 3If the code returns, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor is linked to the anti-spin and stability systems. Have a workshop diagnose and repair it rather than working on the wheel yourself.
Symptome, die Sie bemerken können5
- A text message and yellow warning symbol show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
- The active chassis does not work
Was der Fehler beeinflussen kann1
- The sensor warns the other control modules that the data it sends is wrong
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.