SAS-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
This code means the sensor's software does not match the car, because the configuration IDs differ. The sensor checks its ID against the signal setup that the central electronic module (CEM) sends on the CAN network. When the code is set, the sensor answers diagnostic commands, but ordinary CAN communication does not work.
Mögliche Ursachen
- Incorrect configuration ID, because the unit is not intended for this car, for example a used unit with different software or hardware.
- Incorrect software version.
Was Sie tun können
- 1Check that the steering wheel module or angle sensor is intended for your car.
- 2If someone has replaced the part without loading new software, that may be the cause. Ask a workshop to check this.
- 3Have a workshop read the fault codes and load the latest software into the control module.
- 4The angle sensor is part of the steering and stability system. Have a workshop carry out the fault tracing rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können4
- The information lamp lights up
- The anti-spin warning lamp lights up
- The traction, stability and Four-C functions do not work
- A yellow warning symbol and text message show in the display
Was der Fehler beeinflussen kann1
- The sensor cannot communicate normally on the CAN network
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.