Was bedeutet der Fehlercode SAS-U210000?

Diagnose und Fehlercodedefinition für SAS-U210000 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

SAS-U210000 - Control Module Not Configured. General Failure Information. No sub type information

System

Lenkwinkelsensor (SAS)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The steering angle sensor (SAS) receives information about the car's configuration from the central electronic module (CEM). The code is set when that information is lost. Fault tracing is then carried out in the CEM, since that module sends the information.

Mögliche Ursachen

The fault lies in the module sending the vehicle configuration, which is the central electronic module (CEM).

Was Sie tun können

1Check that the fuses are intact. Their location is shown in the owner's manual or on the fuse box cover.
2With a diagnostic tool, read the fault codes in the CEM and note which ones are present.
3Have a workshop fault-trace the CEM, since the vehicle configuration comes from there.
4The angle sensor is part of the steering and stability system. Have a workshop carry out the fault tracing rather than working on the steering wheel yourself.

Symptome, die Sie bemerken können4

A yellow warning symbol and text message show in the display
The anti-spin and anti-skid warning lamp lights up or behaves abnormally
The anti-spin function does not work
The stability function does not work

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.