VOLVO
SAS-U300004 - Control Module. General Failure Information. System Internal Failures
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The steering angle sensor (SAS) has two processors that work together. The code is set when it detects an internal software fault, and the fault lies in the sensor.
Mögliche Ursachen
- Internal malfunction within the steering angle sensor (SAS).
Was Sie tun können
- 1With the engine running, turn the wheel fully to one side and then fully to the other, and set it straight ahead. Check whether the code remains.
- 2With a diagnostic tool, read the counters for the code. Many incorrect drive cycles point to a recurring fault, while few point to a temporary one.
- 3If the code returns, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor is part of the stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Was der Fehler beeinflussen kann1
- The sensor warns the other control modules that the data it sends is wrong
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.