VOLVO
SAS-U300014 - Control Module. General Electrical Failures. Circuit short to ground or open
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The code applies to an electrical fault in the internal voltage supply to the steering angle sensor, and the cause is an open circuit in that supply. The sensor sits in the lever module with the steering wheel module, which supplies its power.
Mögliche Ursachen
- Open circuit in the internal voltage supply circuit to the steering angle sensor.
Was Sie tun können
- 1With the engine running, turn the wheel fully right and then fully left, and check whether the code is still stored.
- 2With a diagnostic tool, read the counters for the code and see whether the fault occurs often or rarely.
- 3Check that the fuses supplying the steering wheel module are intact in the car's fuse box.
- 4If the fault returns, have a workshop replace the contact reel or angle sensor. If the code comes back after that, the steering wheel module (SWM) must also be replaced.
- 5The angle sensor is part of the stability system. Have a workshop carry out the repair rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Was der Fehler beeinflussen kann1
- The sensor warns the other control modules that the data it sends is wrong
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.