VOLVO
SAS-U300087 - Control Module. Bus Signal / Message Failures. Missing message
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The sensor gets word from the central electronic module (CEM) on the ignition key position. The code is set when that information is missing or wrong for longer than a threshold. The cause then lies in the CEM, and fault tracing continues there.
Mögliche Ursachen
- Key-position data sent by the CEM is absent or incorrect.
- The cause of the fault is in the central electronic module (CEM).
Was Sie tun können
- 1If the code was set while the key was removed, it can be ignored.
- 2With a diagnostic tool, read the stored values from when the code was set, and read the fault codes in the CEM.
- 3Have a workshop fault-trace the central electronic module (CEM), since fault tracing continues there.
- 4The angle sensor is part of the stability system. Have a workshop do the fault tracing rather than working on the steering wheel yourself.
Symptome, die Sie bemerken können5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Was der Fehler beeinflussen kann1
- The sensor warns the other control modules that the data it sends is wrong
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.